GP-S 深色花岗岩翻新保养剂
Dark-colored Granite Face-lifting and Maintenance Agent

特　　点
Features
本产品经独特的配制，施工时操作简单、效率高，专用于各类深色花岗岩翻新打磨后的表面抛光、晶面处理及定期保养。本产品具有光泽度高、增加表面硬度及耐磨度、耐风化等。特别适于黑色花岗（如丰镇黑、黑金砂，巴西黑、蒙古黑等）黑色花岗岩处理前，不须进行任何的染色、增色处理，或迅速恢复石材天然色泽、光鉴如新，富层次感，并具有增强石材抗磨性，防渗性。
This product is in a shape of milk white paste. It is made with unique formula. It is easy and efficient to use. It is specially used for the surface polishing, crystallization processing and regular maintenance of various light-colored granite reconditioned and ground. It can keep the natural color and luster of the stone, making it harder and more wearable and weathering proof. Particularly, it’s applicable for black (such as Fengzhen black, black gold, Brazil black and Mongolia black) granites. Before being processed, black granites need no dying or coloring. The product can resume the natural color and luster of the stone rapidly, making it as bright as new. It can also make the stone more wear resistant and more waterproofing.

使用方法
How to use
1、 清理干净石材表面污渍、腊层，并确保石材表面平整、光滑，若石材表面有划道或凹凸不平时，视磨损程度选用不同目数的翻新磨片打磨至石材表面平整、光滑；
2、 清洗或翻新打磨后有石材，待表面干燥。（对吸水性高的石材翻新或清洁前可涂抹快干型防护剂）
3、 该产品使用前，须充分摇匀，然后洒于石材表面；
4、 将0号或1号钢丝棉盘于白洁抛光垫上，放置有175转以上的单刷机或晶面机的针盘下，匀速地进行抛磨。根据石材干燥度、密度不同，需进行2至4次的反复操作，即可达到理想的效果。
1. Clean the blot and wax layer on the stone surface, and ensure that the stone surface is even and smooth. If the stone surface has been accidented or lacerated, polish the stone surface by using a reconditioning grinding disc with a proper number of eyes till it is even and smooth;
2. Clean or recondition the polished stone till the surface is dry.(Spread fast-dry protective agent before reconditioning or cleaning stones that are highly water absorbing);
3. Shake up it before using. Then spray it on the stone surface;
4. Set the steel wool 0# or 1# on the whitening cushion. Place it under the needle tray of the brushing machine or surface crystallizing machine of 175rpm, and polish at an even speed; The operation may be repeated 2 to 4 times according to the different dryness and density of the stone to produce an ideal effect. 

使用量
Volume of application
每公斤约抛光30至60平米石材。（视石材表面密度、干燥度而定）
A kilogram of the product can be used for polishing of 30 to 60 square meters of stone. (As the stone surface density and dryness may be.)

大堂安哥拉松护理效果